Light-Duty Tent Flooring and Turf Protection System

EventDeck® temporary flooring and pathway system provides access, surface protection, and decorative enhancement for special events and other functions. Signature’s light-duty indoor/outdoor tent flooring, is designed to provide a rigid, dry, support base for tables, chairs, and other equipment and to be used as natural and synthetic turf protection. EventDeck is the perfect alternative to costly built up wooden floors, staging, and decking for special events like weddings and festivals. With fast installation and dismantle times, easy cleanup and reuse for many years, Signature’s event flooring provides a significant return on investment.

Flexible Floor Design

EventDeck temporary flooring system is completely expandable and configurable as required on-site. EventDeck panels connect on all sides using Signature’s easy-to-use connection system. This interlocking design allows for rapid installation and removal with minimal labor and no equipment. Each specially designed connector T utilizes a unique tubular design that serves as both a connector and a fully functional hinge. Staple or tape carpet and synthetic turf right to EventDeck to create a one-of-kind look for any event.

Low Maintenance Tent Flooring System

EventDeck is designed without submerged channels into which debris can be lodged and without any unsightly patterns to catch dirt. Each section has an anti-slip sandblast finish that is low maintenance and easy to clean and maintain using a mop.

Reduce Floor Gaps and Surface Distortion

The slightest variations in temperature causes plastic modular flooring products to expand and contract, creating dangerous gaps and distortion to the surface. Signature Systems’ patented Expansion Joint Technology is designed to compensate for thermal expansion and allow EventDeck to contract and expand naturally without warping.

Create a Safer More Level Temporary Floor

EventDeck has integrated cable channels to create a safer more level floor. Easily run wires and power cords to center poles, and other in-tent areas under the surface the floor, reducing the trip hazard that wires present while also protecting them from damage. Remove individual EventDeck sections to accommodate center poles, side poles, and guy ropes.

Smooth Transition Safety Edging

EventDeck edging is available to enhance the look of the floor and for added safety. Simply snap edge pieces on to the end of any flooring section for a finished look, to provide a visible perimeter, and to allow for wheelchairs, rolling carts and equipment to be transported onto and off the floor. Edging is available in standard colors and in safety yellow.

Fast, Easy Installation

Signature Systems’ proprietary floor design enables EventDeck to be positioned into place using feet only, eliminating the need to bend over or any tools. Pre-assembled sections are compact for easy transport and storage. Once modules are connected, assembled sections roll up for easy installation, storage and transport, allowing for thousands of square feet of event flooring to be installed quickly and easily with minimal labor.

Each individual flooring section is gently curved on the male connector side and correspondingly curved on the female side, such that when a section is butted up against another, it may be nudged into place easily and will self-position. Once positioned, connectors are lined up and ready for snap down connection. This industry leading feature proves invaluable for large installations and saves labor, time, and effort.

EventDeck Installation Times
Area (sq/ft) Time to Install
400 15 minutes – 1 person
2,400 1 hour – 2 people
10,000 3 hours – 4 people
60,000 8 hours – 14 people

*Note: Times may vary depending on site access and equipment. Use of forklifts and installation cars will increase installation speed.

Module Size: 4″ W x 12″ L x .75″ H (10.16 cm x 30.48 cm x 1.91 cm).
Pre-assembled in 3′ x 4′ panels

Material: High-impact polypropylene

Weight: .27 lbs (.12 kg) – 0.81 lbs sq ft (3.95 kg sq/meter)
Weight Load: 8,000 lbs sq/ft (39,059 kilos sq/meter) static load, solid sub-surface

Warranty: 3-year warranty against manufacturer’s defects

National Stock #: 8340-01-525-4069

Maximum Shipping Efficiently
EventDeck comes palletized and partially assembled in sheet form. Sections may then be assembled into large or small rolls, depending on the intended use.
Pallet Size: 40″ x 48″ x 75″ 1,000 sq ft/plt

Truck Quantities
40′ Truck 20 pallets 20,000 sq ft
48′ Truck 24 pallets 24,000 sq ft
53′ Truck 26 Pallets 26,000 sq ft

Note: Although 1,000 sq ft/plt, are recommended, pallets can be loaded to 1,369 sq ft if required. High cube ocean containers can be loaded with additional product.

Ocean Container Quantities
20′ FC Ocean Container 12,340 sq ft
40′ HC Ocean Container 27,380 sq ft

Fire Rating: UL 94HB (Underwriters Laboratory Yellow Card Number) This test signifies that this product does not flare up when exposed to an open flame and has a slow burn rate of 2” per minute for a 2” wide, 0.5 millimeter thickness test sample. EventDeck meets applicable standards for temporary floor covers.

ASTM 2859 (Flammability of Finished Texture Floor Covering Materials) – passed test * Testing reports available for fire ratings

Hot Wire Ignition Rating: 3

Melting Point: 324° Fahrenheit / 162° Celsius

Operating Range: -10°F – 150°F / -23.33° C – 65.56°C

Edging Specifications: Edging size is 3” x 12” x ¾” (tapered). Edging is designed to attach to flooring modules both lengthwise and widthwise, providing a gradual tapered edge. Edging extends flat 1” from end of flooring module and then slopes down to ground over a 2” span.

Learn how EventDeck® can work for you

Get More Information

Consult with an expert via phone or email for advice, recommendations and pricing information. Call 972-684-5736 or submit the email form below:

  • This field is for validation purposes and should be left unchanged.